Liberon Superior Danish Oil 1000ml

Liberon Superior Danish Oil is a blend of pure tung oil and natural oils which Feeds, protects and enhances the natural colour of wood.  It is a penetrating oil, which brings out the natural grain of the timber and provides a satin to gloss sheen.

COVERAGE: 10-12m²

With added UV filters to help prevent discolouration from the sun it is suitable for interior and exterior use

Water, heat and alcohol resistant.

Quick drying formula.

Suitable for interior and exterior use.

EN71 Approved – Safe for toys.

Interior Woodwork - Ensure the surface is bare: remove any wax finishes with Liberon Wax and Polish Remover and any varnish finishes with Liberon Fine Wood Stripper. Clean, dry and ensure the surface is dust free.  If required stain the wood with Liberon Palette Wood Dye before oiling.

Interior Woodwork Application - Apply with a brush or lint-free cotton cloth and allow to penetrate for 5 to 10 minutes before wiping off the excess with a clean lint-free cloth. Allow to dry for a minimum of 5 hours and apply more coats as required. We recommend a minimum of 3 coats. For best results gently rub with Liberon Ultra Fine Steel Wool (0000) between coats. In damp areas such as kitchens and bathrooms more coats will be required.

Exterior Woodwork - Ensure the surface is clean, dry and free from decaying timber. Surface greying or mould should also be removed as this may cause blackening of the timber.

Exterior Woodwork Application - Apply as above. Application of 4 coats will give minimum protection. Exposed areas will require more coats. It is important to ensure sufficient coats of oil are applied initially to give maximum protection. It is not necessary to remove the excess on sawn timber, but do wipe off any runs. Important Oil finishes bring out the natural colours of timber. A wet surface will be an indication of the final colour. Always test product on spare surface of inconspicuous area for colour, compatibility and end result.