Gladiator PUR 241 Polyurethane Adhesive 310ml

GLADIATOR PUR 241 is a thrixotropic gel, one-part moisture curing polyurethane, fully waterproof assembly and repair adhesive for the joinery and construction industry.

Gladiator PUR 241 provides excellent bonding strength to bond most types of wood (hard, soft, exotic), can also be used on plasterboard, rubber, concrete and thermal insulation materials and foams slightly on application to fill small gaps, which increases bond strength.

Gladiator PU Glue Rapid Adhesive may be used internally or externally and can be used vertically, for the manufacture of all joinery applications including windows, door frames, staircases and more.

Preparation

The surfaces to be bonded must be clean, dry and free from dust and grease.

Gladiator PUR 241 Rapid Adhesive should be applied to only one of the surfaces to be bonded.

Roughen non-porus surface to give a key for the adhesive.

The parts to be bonded should be assembled within the skin formation time and should be pressed or clamped until functional hardness can be reached.

To accelerate curing, moisten one surface with a water spray bottle or damp cloth. Do not over wet. For bonding steam tight or dry materials, this is required.

During the curing reaction carbon dioxide is released which foams the adhesive slightly.

Limitations

One of the surfaces must be porus.

Moisture content of wood must not exceed 30% w/w.

Ensure surfaces are always clamped during cure.

The skin formation time is 5 minutes depending on temperature and climate.

Curing time may vary depending on temperature and climate.

Not suitable for polyethylene, polypropylene, Teflon or Nylon.