Timba Build EWS 2 Part Epoxy Wood Stabiliser 225ml

Product Code: 13908
£15.28 (£18.34 inc. VAT)
  • Buy 3 for £11.46 (£13.75 incl. tax) each and save 25%
  • Buy 5 for £11.08 (£13.29 incl. tax) each and save 28%
Buy As Trade

Availability: Item stocked in our warehouse

Quick Overview
Key benefits

• Solvent Free - suitable for indoors and outdoors
• Excellent Penetration due to the Low Viscosity
• Pre-measured to Volume 2:1 ratio to ensure accurate mix
• High Strength & Durability
• Fast and Simple to Use, Easy to Clean and Store
• Used with the EHB60 (13907 - Related products) systems
Description
Timbabuild Epoxy Wood Stabiliser is a specially designed two-part low viscosity, solvent free, resin solution which is designed to strengthen weakened wood fibres by penetrating deep into the wood. The product is used as a primer in conjunction with the Epoxy High Build (13907) systems. Once the damaged, decayed and discoloured wood has been removed by use of a suitable cutter tool such as a router or chisel, then the area to be treated is lightly sanded to ensure excellent adhesion. The moisture content of the wood should be no greater than 18% (check using a standard moisture meter) and damp wood should be allowed to dry naturally, or by way of a hot air gun. The two components are mixed manually into a separate container, and thoroughly agitated for one minute. The 2:1 mixing ratio should be strictly observed. EWS should be applied using a standard brush and left to cure for 30 minutes.

Attachments

EWS Size: (872.5 KB)