Fiddes Exterior High Build UV Wood Oil - 2.5L

Product Code: 29259

£39.99 (£47.99 inc. VAT) Special Price

Regular Price: £60.00 (£72.00 inc. VAT)

Buy As Trade
Quick Overview
• Always test on a small area prior to major application.
• Ensure timber is dry and has been treated with preservative
• Minimum 3 coats recommended
• Longer drying periods many occur during application in cold,damp or humid conditions.
• Coat all areas thoroughly to seal.

Can Size - 2.5Litres

Re application: To renovate previous application of Fiddes Exterior High Build Wood Oil, lightly sand area with 150 grit sandpaper and re-apply

Coverage: 1 litre covers approximately 20-24m², depending on density of substrate.
Product Description
A blend of natural oils & resins offering a transparent satin finish with exceptional durability and resistance for all external joinery & woodwork. Produces a clear, quick drying, water repellent and weather resistant finish that will not peel or flake when applied following directions below. Contains UV Filters and is VOC compliant. Preparation - Ensure all surfaces are clean, dry, and free from any previous finish. Remove any fungal growth, dirt or moss on old wood prior to application, and ensure a preservative has been applied. Sand the substrate with a medium 120 grade sanding paper or 120 grade sanding disk, removing all traces of dust. Application - Apply in dry conditions. Always test on a small area prior to initial application. No primer required. Minimum 3 coats recommended. Fiddes Exterior High Build Wood Oil is formulated for application directly, and does not require thinning. First Coat - Stir contents thoroughly before and during use. Apply using a good quality bristle or synthetic brush and apply EVENLY and THOROUGHLY, following the direction of the grain. Leave to dry 4-6 hours in warm, dry well ventilated conditions, or preferably overnight. Sand lightly with fine 320 grade sand paper. Second Coat - Apply as first coat, evenly, allowing good ventilation. Leave to dry 4-6 hours in warm, dry conditions, or preferably overnight. Third Coat - Apply as above. Clean applicators with White Spirit.